General Description
Equipped with all the zero leak bidirectional checking sole-noid valves, this energy unit is made for that operation of two independent circuits. Which are respectively for the principal and subordinate platforms in the double scissors lift. Two cut-off valves are utilised for lowering the machine manually in situation of power reduction. If much more independent circuits are needed to your application please get hold of us for availability.
Remark: one. Please seek the advice of our sales engineer for the different pump displacement, motor power or tank capability.
two. CSA or UL licensed motors can be found upon request.
Exclusive Notes
1. The AC motor is of S3 duty cycle, which can only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean each of the hydraulic components concerned ahead of installation of the power unit.
3. Viscosity in the oil shoud be 15~46 cst,and also the oil should be clean and free of charge of impurities,N46 hydraulic oil is advisable.
4. The power unit should really be mounted vertically.
five. Check the oil level from the tank just after the initial working from the electrical power unit.
six. Oil modifying is required following the initial one hundred operation hours,afterwards the moment each 3000 hrs.