Materials Dealing with Electrical power UNIT 1
Standard Description
This power unit is made for the fork lift market, consisting of extremely effective gear pump, DC motor, manual increase and reduce valve, tank, ect. The up and down motion are managed from the lever of your manual release valve, which can be outfitted with an electrical switch to activate the motor. The lowing velocity is controlled by the strain compensated movement manage valve.
Specific Notes
one. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic elements concerned prior to installation of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which really should also be clean and totally free of impurities, N46 hydraulic oil is suggested .
four. Oil altering is required following the original 100 operation hrs, afterwards the moment each and every 3000 hours.
five. The energy unit shown is intended to be mounted horizontally.

Materials Dealing with Electrical power UNIT 2
General Description
This electrical power unit functions electrical power up gravity down circuit. Activate the start off solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve using the decreasing velocity controlled from the strain compensated flow management valve. Items of this series can be extensively utilized in the industry of logistic units such as fork lift, mini lift table, and so forth.
Distinctive Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all of the hydraulic parts concerned ahead of mounting the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and cost-free of impurities, N46 hydraulic oil is proposed .
4. Oil modifying is required soon after the original a hundred operation hours,afterwards when every 3000 hrs.
five. The electrical power unit must be mounted horizontally.